- Home
- Marine
- Pursuit Boats 2020
- Pursuit Boats Sport Series S288 2020
Pursuit Boats Sport Series S288 2020
Configuration and Pricing Guide
MSRP:
INVOICE:
- Build Model
- The Details
- Similar Boats
- The See Dealer Cost Story
Standard Equipment
L.O.A. (ft/in): 30’ 0”
Beam (ft/in): 9' 8"
Hull Draft (motors up) (ft/in): 2’ 0”
Hull Draft (motors down) (ft/in): 3’ 0”
Clearance with Hardtop (from waterline) (ft/in): 7’ 9”
Dry Weight (twin F300 engines) (lbs): 8,200
Fuel Capacity (gals): 230
Fresh Water Capacity (gals): 26
Holding Tank Capacity (gals): 9
Max HP: 600
Deadrise (degrees): 24°
Pursuit Boats Sport Series S288 2020 Info
STANDARDS
HULL
Pursuit Fresh White Gelcoat
Yamaha Paint on Engines
Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
5 Ply Resin Infused Composite Transom System with Patented Transom Reinforcement Grid
Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
Foam Filled Structural Grid
Bronze Thru Hull Fittings Below Water Line
Chrome over Bronze Thru Hull Fittings Below the 7 Degree Heel Line
Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
Bronze Garboard Drain
Trim Tabs, Lenco Electric with Auto-Retract
Bow Eye, 5/8" 316L Stainless Steel
Stern Eyes (2), 5/8" 316L Stainless Steel
Integrated Transom Platform Extensions Outboard of Engines
Boarding Ladder, 3-Step Telescopic, Mounted in Hull Platform
Anchor System, Integrally Molded Thru-Stem
Horn, Electric, with Oval Stainless Steel Cover
Dedicated Transducer Location
Horn, Electric, with Oval Stainless Steel Cover
DECK
Hull and Deck Joint Mechanically Fastened
Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area
Flush Mounted Integral Anchor Locker with Fiberglass Lid including: Horizontal Anchor Windlass with Switch at Helm, Remote at Anchor Locker and Raw Water Washdown
316L Stainless Steel through Stem Anchor Roller with 8" Mooring Cleat, Chain Binder, 14lb Stainless Steel Plow Style Anchor, Self-Righting Shackle and 200&39; Rode (1/2" 8 Plait including 10&39; of ¼" G4 Chain)
LED Anchor Locker Light
Cleats, 316 Stainless Steel, 8" Pop Up (2) Stern, (2) Spring and (2) Bow
Molded Recessed Hatches with Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
Molded Transom Walkthrough with Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
Self-Draining Cockpit with Bronze Ball Valve at Hull Side
Bow Grab Rails, 316L Stainless Steel (port and starboard)
Transom Grab Rails, 316L Stainless Steel, (port and starboard)
Molded Non-Skid Transom Bridge for Athwartship Access
Navigation Lights, LED, 2 mile
COCKPIT
Molded FRP Hull Side Boarding Door
Drink Holders (2), Located in Gunwale
Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
Helm Seating with Teak Accents, Split Bolster, Foldable Armrests and Fore/Aft Adjustment
Molded Helm Seat Console with Drink Holders (2), Dedicated Tackle Storage, Storage Drawers, 12V MDP and Folding Aft Facing Seat
Pursuit Cockpit JL Audio Entertainment System: 12V Bluetooth Compatible Stereo System, Premium Speakers (5 Total, 2 in Hardtop, 2 in Bow, and Subwoofer) and Amplifier
Folding Transom Seat with Adjusting Backrest
Aft Cockpit Machinery Access Hatch
Forward Cockpit Machinery Access Hatch
Fresh Water Wash with Chrome over Brass Pull out Sprayer and Quick Fittings
Raw Water Outlet in Cockpit with Quick Connect Fittings and 25&39; Hose
LED Cockpit Accent Lights (7) with Water Proof Switch in Cockpit
Forward Facing Seat for two on Front of Console with Armrests
Molded Forward Bow Seating with Insulated Storage Below, Removable Cushions, Folding Forward Facing Backrests for Port and Starboard Seats
Bow Tonneau Cover, Sunbrella
Helm Companion Seat Cover, Sunbrella
Fire Extinguisher (under starboard gunwale)
FISHING
Rod Holders (4), Stainless Steel, in Gunwale
Lighted Oceana Blue 24 Gallon Recirculating Livewell with Acrylic Lid
Under Gunwale Rod Storage with Reel Pads (port and starboard)
Fish Boxes (45 gallons), Insulated and Diaphragm Pumps with Overboard Discharge (port and starboard)
Vertical Rod Holders (4), Stainless Steel, in Transom
Rod Storage Under Hardtop (port and starboard)
HARDTOP and WINDSHIELD
Molded Fiberglass Full Beam Hardtop
Custom Powder Coated Aft Structural Hardtop Supports
Custom Windshield System with Tempered Glass and Windshield Wiper
Custom Powder Coated Grab Rails on Windshield Frame (port and starboard)
Custom Stainless Steel Ratcheting LED Anchor/Stern Light with Burgee Rings
Four (4) Tri Color LED Lights
Fore and Aft Facing Spreader Lights
Integrated Stereo Speakers (2)
Hardtop Acrylic Access/Ventilation Hatch
Fiberglass Hardtop with Dedicated Radar, Antenna, Outrigger and Spotlight Locations
HELM
Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface, Fixed Fiberglass Footrest and Safety Lanyard
316L Stainless Steel Steering Wheel with Control Knob and Non-Slip Grip on Sport Tilt Plus Helm
12V Panel with Illuminated Carling Rocker Switches
Single Windshield Wiper with Washer Control
Compass
Trim Tab Control Panel and Indicator
Waterproof Stereo Remote with Full Function Display
Integrated Glovebox with One 12V Outlet (1) and Dual USB Charger
316L Stainless Steel Helm Drink Holders (2)
Fire Extinguisher (under port gunwale)
Yamaha Command Link Plus Display
Dash/Instrument Cover
CONSOLE and HEAD
Two Piece Fiberglass Head Door with Gasket and 316L Stainless Steel Locking Latch
Molded Cabin Liner with Integrated Entry Steps
Vacuum Flush Marine Head with 9 Gallon Holding Tank, Macerator Discharge Pump, 316L Stainless Steel Deck Pump-out Fitting and Bronze Thru Hull Fitting with Seacock
Fiberglass Toilet Seat Cover
Designer Sink with Corian Countertop, Fresh Water Faucet and Vanity Mirror
Integrally Switched 12V Overhead Light
316L Stainless Steel Opening Port Light (1) with Screen
Storage Hooks (3)
Fire Extinguisher
Toilet Tissue Holder
ELECTRICAL SYSTEMS
UL Rated Fully Tinned, Color Coded Copper Wire
Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
Custom In-House Built, One-Piece Electrical Harness with Water Proof Connectors and Chafe Protection
Powder Coated, Aluminum, Screen Printed (Front and Back) Battery Switch and Breaker Panel
Bonding System: Thru Hull Fittings Below Water Line, Trim Tabs, Zinc Anode and Garboard Drain
Three Battery System: Port Engine (1), Starboard Engine (1) and House (1)
One Grounding Bus Bar
Electronics Fuse Block
One 12V Outlet (1) and One Dual USB Charger (1)
MECHANICAL SPACE
Molded Interior White Gel Coat
Molded Hatch with Gasket and Stainless Steel Gas Spring
Molded Bilge Sump Area
One 1500 GPH Bilge Pump with Electronic Switch, One 1500 GPH Bilge Pump with High Water Electronic Switch and Alarm with Stainless Steel Clad Composite Thru Hull Fittings
Fresh Water Pump with Filter
Raw Water Pump with Sea Strainer, Sea Cock and Thru Hull Fitting
Dedicated Fishbox Diaphragm Evacuation Pumps
Livewell Cyclone Pump with Bronze Sea Strainer
Teleflex Power Steering Pump
FUEL SYSTEM
EPA Compliant Lined Rotomolded 230 Gallon Fuel Tank with Engine Pickups, Shutoff Valves, Digital Level Indicator and Deck Fuel Fill Plate
Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
Two (2) Yamaha Water Separating Fuel Filters with Primer Bulbs
WATER SYSTEM
26 Gallon Water Tank and 316L Stainless Steel Deck Fill Plate
Premium Sea Tech Color Coded Water Hose System with Mechanically Crimped Ends
Pressure Sensing/Variable Speed Pump
Centrally Located Freshwater Connections
Cockpit Shower
Similar Boats
More Fiberglass Fish
The See Dealer Cost Story
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Welcome To See Dealer Cost!
Get Product and Pricing Information for Free!
Register
Why? It's Free!
- Save Research
- Save Product Configurations
- Compare Configurations
- View Saved Price Quote Requests