* I agree that SeeDealerCost and its Certified Dealers may communicate with me via email, text, or phone. My consent to these terms is not a condition of any purchase. Message & data rates may apply. You can reply STOP to opt-out of further messaging.
L.O.A. (ft/in): 27’ 4”
Beam (ft/in): 8' 9"
Hull Draft (motors up) (ft/in): 1’ 9”
Hull Draft (motors down) (ft/in): 2’ 9”
Clearance with Hardtop (from waterline) (ft/in): 7’ 11”
Dry Weight (Twin F200 engines) (lbs): 6,800
Fuel Capacity (gals): 139
Fresh Water Capacity (gals): 20
Holding Tank Capacity (gals): 13
Livewell Capacity (gals): 20
Fishbox Capacity (gals): 31
Max HP: 400
Deadrise (degrees): 21°
FEATURES
HULL
Pursuit Protection Plan:
5 Year Hull and Deck Structural Warranty
5 Year Blister Free Warranty
2 Year Limited Warrant
Pursuit Fresh White Gelcoat
Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
5 Ply Resin Infused Composite Transom System
Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
Foam Filled Structural Grid
Integrated Transom Platform Extensions Outboard of Engines
Bronze Thru Hull Fittings Below Water Line
Chrome over Bronze Thru Hull Fittings Below the 7 Degree Heel Line
Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
Bronze Garboard Drain
Trim Tabs, Lenco Electric with Auto-Retract
Bow Eye, 1/2" 316L Stainless Steel
Stern Eyes (2), 1/2" 316L Stainless Steel
Boarding Ladder, 3-Step Telescopic, Mounted in Hull Platform
Anchor System, Integrally Molded Thru-Stem
Horn, Electric, with Oval Stainless Steel Cover
Dedicated Transducer Location
DECK
Hull and Deck Joint Mechanically Fastened
Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area
Flush Mounted Integral Anchor Locker (self-draining) with Fiberglass Lid including: 316L Stainless Steel through Stem Anchor Roller with 8" Mooring Cleat, Chain Binder, 14lb Galvanized Plow Style Anchor, Self-Righting Shackle and 150&39; Rode (1/2" 8 Plait including 10&39; of ¼" G4 Chain)
LED Anchor Locker Light
Cleats, 316 Stainless Steel, 8" Pop Up (2) Stern, (2) Spring and (2) Bow
Molded Recessed Hatches with Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
Molded Transom Walkthrough with Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
Self-Draining Cockpit with Bronze Ball Valve at Hull Side
Bow Grab Rails, 316L Stainless Steel (port and starboard)
Transom Grab Rails, 316L Stainless Steel (port and starboard)
Navigation Lights, LED, 2 mile
COCKPIT
Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
Molded Forward Bow Seating with Flip-down Armrests and Storage Below
Port and Starboard Bow Coaming Boxes with USB Charging port (port side)
Flush-mounted, Single Piece, Acrylic Bow Access Door
Captain’s Chair with Foldable Armrests, Fore, Aft and Swivel Adjustments
Companion Seat with 316L Stainless Steel Grab Handle
Cockpit Tackle Center with three Removable Trays and two Sliding Drawers
Molded Entertainment Center with Sink, Faucet, Cutting Board, Dedicated Storage for 3.5 gallon Bucket and Hinged Fiberglass Lid and Door
Molded Aft Facing Cockpit Seat with Insulated Storage Below
Folding Transom Seat with Patented Adjusting Backrest and Folding Drink Holder
Folding Seat (portside) Under Gunwale
Cockpit Mid-ship Floor Storage
Cockpit Machinery Access Hatch
Cockpit Transom Storage with Drain and Fiberglass Lid
Fresh Water Wash with Chrome over Brass Pull-out Sprayer
Raw Water Outlet in Cockpit with Quick Connect Fittings and 25&39; Hose
Drink Holders: 316L Stainless Steel, (2) Bow, (1) Companion and (2) in Gunwale Acrylic, (2) Aft Facing Cockpit Seat and (1) Helm
LED Cockpit Accent Lights (5)
12V Distribution Panel and Battery Switches
Bow Tonneau Cover - Sunbrella
Cockpit Fire Extinguisher (under starboard side gunwale)
FISHING
Rod Holders (4), Stainless Steel, in Gunwale
Lighted Oceana Blue 20 Gallon Recirculating Insulated Live Well with Plexiglas Lid
Under Gunwale Rod (2) Storage (starboard)
Fish Box/Storage, in-transom (31 gallon) Insulated Fiberglass with Drain
Tackle Drawer/Storage under Companion Seat
Aluminum Reinforcement Plates and Wiring for Downrigger Installation, Aft Gunwale (port and starboard)
HELM
Molded Fiberglass Helm with Instrumentation Visor, Electronics Mounting Surface and Safety Lanyard
316L Stainless Steel Steering Wheel with Control Knob and Non-Slip Grip on Sport Tilt Plus Helm
12V Panel with Illuminated Carling Rocker Switches
Compass
Trim Tab Control Panel and Indicator
One (1) 12V Outlet and Dual USB Charger
Starboard Coaming Box Storage and Drink Holder
Helm Fire Extinguisher
Yamaha 6YC Digital Engine Display
Yamaha Electronic Twin Engine Binnacle Control
Key Switch Panel with Safety Lanyard
Push Button Start Panel
Standard Titanium Helm Color
CONSOLE (STARBOARD SIDE)
Molded Fiberglass Interior
Locking Closeout Door
Integrally Switched 12V Overhead Light
Dedicated Dock Line Storage
Dedicated Storage Space for Optional Bow Table
Dedicated Storage Space for Optional Bow Sun Pad
HEAD (PORT SIDE)
Two Piece Fiberglass Door with Gasket, Integrated Storage/Visor, Grab Rail and 316L Stainless Steel Locking Latch
Molded Fiberglass Head Liner
Electric Marine Head with 13 Gallon Holding Tank, Macerator Discharge Pump, 316L Stainless Steel Deck Pump-out Fitting and Bronze through Hull Fitting with Seacock
Sink with Freshwater Faucet
Integrally Switched 12V Overhead Light
Fire Extinguisher
Toilet Tissue Holder
HARDTOP and WINDSHIELD
Fiberglass Hardtop with Connector and Side Curtains - Sunbrella and Powder Coated Aluminum Structural Supports
Dedicated Locations for Optional VHF Antenna and Outriggers
Molded Fiberglass Windshield Frame with Tempered Glass Windshield and a Center Walk-through Door
Two (2) Tri Color LED Lights
Integrated Fore and Aft Facing LED Spreader Lights
Custom Stainless Steel Ratcheting Anchor/Stern Light with Burgee Rings and USA Flag
ELECTRICAL SYSTEMS
UL Rated Fully Tinned, Color Coded Copper Wire
Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
Custom In-House Built, One-Piece Electrical Harness with Water Proof Connectors and Chafe Protection
Powder Coated, Aluminum, Screen Printed (Front and Back) Battery Switch and Breaker Panel
Two Battery System: Engines (1) and House (1)
One Grounding Bus Bar
Electronics Fuse Block
MECHANICAL SYSTEMS
Molded Interior White Gel Coat
Molded Access Hatch
Removable Fuel Tank Sending Unit Hatch
Molded Bilge Sump Area
Two (2) 1500 GPH Bilge Pumps with Electronic Switches and Stainless Steel Clad Thru Hull Fittings
1100 GPH Tournament Series Live well Pump, Sea Cock and Thru Hull Fitting
Pressure Sensing Raw Water Pump with In-Line Filter
FUEL SYSTEMS
EPA Compliant Lined 139 Gallon Rotomolded Fuel Tank with Engine Pickups, Shutoff Valves, Digital Level Indicator and Deck Fuel Fill Plate
Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
Yamaha Water Separating Fuel Filters with Primer Bulbs
WATER SYSTEMS
20 Gallon Water Tank and 316L Stainless Steel Deck Fill Plate
Premium Sea Tech Color Coded Water Hose System with Pressure Sensing Pump and Mechanically Crimped Ends
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Get Product and Pricing Information for Free!
Why? It's Free!
Enter your zipcode to access FREE Product and Pricing Information.
We can email this valuable information directly to you, empowering you to negotiate the best price with a boat dealer.