- Home
- Marine
- Mako Boats 2021
- Mako Boats Offshore Series 284CC 2021
Mako Boats Offshore Series 284CC 2021
Configuration and Pricing Guide
MSRP:
INVOICE:
- Build Model
- The Details
- Similar Boats
- The See Dealer Cost Story
* I agree that SeeDealerCost and its Certified Dealers may communicate with me via email, text, or phone. My consent to these terms is not a condition of any purchase. Message & data rates may apply. You can reply STOP to opt-out of further messaging.
Standard Equipment
Length: 28' 4''
Beam: 9' 10''
Bottom width: 7' 9''
Max. recommended HP: 700 HP
Fuel capacity: 228 gal.
Max. person capacity: 13 persons
Max. person weight: 5,490 lbs.
Max. person, motor and gear weight: 5,791 lbs.
Interior depth: 33"
Transom height at center line: 30"
Deadrise: 21 degrees
Draft: 21"
Dry weight: 7,270 lbs.
Average hull weight: 6,000 lbs.
Average package weight: 9,800 lbs.
Package height with T-top or hardtop: 12' 4''
Storage length: 37' 10''
Mako Boats Offshore Series 284CC 2021 Info
STANDARDS
SAFETY
Backed by the MAKO Assurance 5+Life—the best factory warranty in saltwater boats
NMMA certified
Factory leak tested for hull, plumbing and fitting integrity
Horn
Flush-mounted Ritchie Navigation Voyager compass
CONSOLE
Custom anodized aluminum tilt steering wheel with knob
Binnacle-mounted motor control(s)
Dual-cylinder hydraulic steering
Mercury SmartCraft digital gauges
Trim tab switches with position indicator lights and auto retract
Powdercoated aluminum battery switch panel with labels, main power shutoff, emergency parallel switch, removable knobs and voltage sensing relays (VSR)
Switch panel with manual reset circuit breakers and illuminated switches
Easy access to helm electronics, instruments and switches
Oversized forward-console seat with storage compartment and 2 drink holders
Integrated full-width fiberglass footrest with non-skid surface
Tempered safety glass windshield with aluminum frame
Marine-grade tinned wiring with submersible connectors
Extra-large electronics mounting surface
2 console drink holders
12V DC outlet
LEANING POST
Fiberglass leaning post
Backrest
Helm seat with flip-up cushion
Storage below
Bait prep station with freshwater sink, removable cutting board, 50-gal. (189.27 L) anti-slosh livewell and tackle storage
T-TOP/HARDTOP
Outrigger-ready fiberglass hardtop with 5 rod holders, electronics box and 3 spreader lights (1 fore, 2 aft)
.25" (6.35 mm) in-deck aluminum backing-plate reinforcement for frame
.25" (6.35 mm) in-hardtop aluminum backing-plate reinforcement
HEAD
Gelcoat-finished surface, sink, wiring access hatches, battery switch panel, battery access and 6&39; (1.83 m) head room
Sink with faucet and on-demand freshwater
Portlight in head door
INTERIOR
Anchor locker with protective inner liner
Foredeck dodger mounting boss
Port and starboard forward seats with 99-qt (93.69 L) insulated storage below with gravity overboard drainage
470-qt. (444.79 L) bow center in-deck storage compartment with drain
Low-profile brushed anodized aluminum bow rails
Self-bailing cockpit with gutters, oversized drains and transom valves
3 port and 3 starboard gunnel-mounted rod holders
Port and starboard under-gunnel rod racks for 6 rods up to 7&39; (2.13 m) long
Port and starboard tilt-out storage bins
Freshwater shower with pull-out spray head
290-qt. (274.44 L) insulated aft port and starboard in-deck fishboXEs with Gulper macerator and overboard discharge
Molded non-skid surfaces throughout
Bilge access hatch
Walk-thru transom with latching door
Aft port and starboard coaming bolsters
Stainless steel cleats with access via hawse pipes
2 bow drink holders
PERFORMANCE
Legendary dry-riding MAKO hull
Aggressive deep V hull design
Performance lifting strakes
Recessed electric trim tabs
Factory-matched stainless steel propellers
CONSTRUCTION/EXTERIOR
Color: MAKO Bone White gelcoat
100% composite construction
Coosa Bluewater 100% composite transom core
Heavy-duty, fiberglass-encapsulated transom with 2" (5.08 cm) fiberglass-impregnated, high-density composite core
Hull/deck joint chemically sealed and bonded 360° and mechanically fastened every 6" (15.24 cm) with 316 stainless steel fasteners
1-piece molded fiberglass stringer grid with integrated transom knee supports and gelcoat finish
Closed-cell foam-injected stringer grid for USCG-approved flotation
Heavy-duty rub rail with stainless steel insert
Premium marine-grade stainless steel hardware and fasteners for corrosion resistance
Closed-molded hatch covers with finished undersides and integrated gaskets
Aluminum backing plates for cleats and chocks
Port and starboard molded-in swim platforms
Recessed, pull-out, telescoping boarding ladder
ELECTRICAL/MECHANICAL/PLUMBING SYSTEM
Aluminum main fuel tank with 4 baffles
2 automatic 2,000 GPH (7,570.82 LPH) bilge pumps
1,600 GPH (6,056.66 LPH) and 1,100 GPH (4,163.95 LPH) livewell pumps
Pressurized raw water washdown pump
High-speed raw water intake
Pressurized freshwater pump
13-gal. (49.21 L) freshwater tank for sinks and shower
USCG-compliant navigation lights
2 cockpit courtesy lights and 1 head light
1 cranking battery per outboard
Marelon corrosion-free seacocks on all below-water thru-hull fittings
Labeled, tinned-copper wiring for easy maintenance and protection in a marine environment
Pre-wired for optional stereo system and speakers
Pre-wired for optional anchor windlass
Similar Boats
More Fiberglass Fish
The See Dealer Cost Story
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Welcome To See Dealer Cost!
Get Product and Pricing Information for Free!
Register
Why? It's Free!
- Save Research
- Save Product Configurations
- Compare Configurations
- View Saved Price Quote Requests
'
WAIT! You haven't printed your configuration yet.
We can email this valuable information directly to you, empowering you to negotiate the best price with a boat dealer.