- Home
- Marine
- Pursuit Boats 2020
- Pursuit Boats Dual Console Series DC325 2020
Pursuit Boats Dual Console Series DC325 2020
Configuration and Pricing Guide
MSRP:
INVOICE:
- Build Model
- The Details
- Similar Boats
- The See Dealer Cost Story
Standard Equipment
L.O.A. (ft/in): 34’ 6”
Beam (ft/in): 10' 10"
Hull Draft (motors up) (ft/in): 1’ 10”
Hull Draft (motors down) (ft/in): 2’ 8”
Clearance with Hardtop (from waterline) (ft/in): 8’ 2”
Dry Weight (twin F300 engines) (lbs): 11,775
Fuel Capacity (gals): 300
Water Capacity (gals): 30
Waste Capacity (gals): 10
Max HP: 600
Deadrise (degrees): 20°
Pursuit Boats Dual Console Series DC325 2020 Info
STANDARDS
HULL FEATURES
Pursuit Fresh White Gelcoat
Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
5 Ply Resin Infused Composite Transom System with Patented Transom Reinforcement Grid
Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
Foam Filled Structural Grid
Bronze Thru Hull Fittings Below Water Line
Chrome over Bronze Thru Hull Fittings Below the 7 Degree Heel Line
Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
Bronze Garboard Drain
Trim Tabs, Lenco Electric with Auto-Retract
Bow Eye, 5/8" 316L Stainless Steel
Integrated Transom Platform Extensions Outboard of Engines
Boarding Ladder, 4-Step Telescopic, Mounted in Hull Platform
Anchor System, Integrally Molded Thru-Stem
Horn, Electric, with Oval Stainless Steel Cover
Bow Thruster, 3.0 HP (2.2 kW) with Group 31 AGM Battery, Switch and Fuse
Dedicated Transducer Location
Forward Hull Compartmentation with One 1100 GPH Bilge Pump with Automatic Float Switch
DECK FEATURES
Hull and Deck Joint Mechanically Fastened
Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area
Flush Mounted Integral Anchor Locker with Fiberglass Lid including: Horizontal Anchor Windlass with Switch at Helm and Remote at Anchor Locker 316L Stainless Steel through Stem Anchor Roller with 8" Mooring Cleat and Chain Binder 22lb Stainless Steel Plow Style Anchor, Self-Righting Shackle and 200&39; Rode (1/2" 8 Plait including 10&39; of ¼" G4 Chain)
Cleats, 316 Stainless Steel, 10" Pop Up (2) Stern, (4) Spring and (2) Bow
Molded Recessed Hatches with Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
Molded Transom Walkthrough with Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
Self-Draining Cockpit with Bronze Ball Valve at Hull Side
Bow Grab Rail, 316L Stainless Steel
Transom Grab Rails, 316L Stainless Steel, (port and starboard)
Molded Non-Skid Steps in Splashwell for Athwartship Access
Navigation Lights, LED, 2 mile
Opening Port Light with Screen and Stainless Steel Frame
COCKPIT FEATURES
Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
Molded Forward Bow Seating with Flip-down Armrests and Storage Below
Port and Starboard Forward Coaming Boxes with Four (4) Drink Holder, Storage Keeper, 12V and USB Charger (One Side Only), Mid-Level Lighting, Stereo Remote and (2) Speakers
Captain’s Chair with Foldable Armrests, Fore and Aft Adjustment with Storage Below
Molded Bridge Lounge Seating (forward or aft facing) with Flip-down Armrest
Pursuit Cockpit JL Audio Entertainment System: 12V Bluetooth Compatible Stereo System, JL Speakers (7 Total, 4 in Hardtop, 2 in Bow, and Subwoofer), Amplifier and Zonal Remotes (3)
Molded Entertainment Center with Sink, Hot/Cold Mixing Faucet, Trash Can, Drink Holders, Cutting Board and Hinged Fiberglass Lid and Door
12v, 2.3 cubic ft Stainless Steel Drawer Refrigerator with 3M Protective Film
Molded Aft Facing Cockpit Seat with Storage Below
Folding Transom Seat with Patented Adjusting Backrest
Folding Seat (portside) Under Gunwale
Folding Fiberglass Boarding Step (starboard)
Custom Molded Cockpit Table with Dual Mounting Locations and Dedicated Storage
Cockpit Machinery Access Hatch
Bow Machinery Access Hatch
Forward Cockpit Table and Bow Sunpad Filler
Mid-ship Machinery Access Hatch
Fresh Water Wash with Chrome over Brass Pull-out Sprayer
Raw Water Outlet in Cockpit with Quick Connect Fittings and 25&39; Hose
LED Cockpit Accent Lights (7)
Under Gunwale Mid-Level Accent Lighting
Sunbrella Bow Tonneau Cover
Four (4) 316 L Stainless Steel Drink Holders on Bridges Lounge, Two (2) Acrylic Drink Holders at Helm and Two (4) 316L Stainless Steel in Gunwale
FISHING FEATURES
Rod Holders (4), Stainless Steel, in Gunwale
Lighted Oceana Blue 24 Gallon Recirculating Live Well
Under Gunwale Rod Storage (starboard)
Fish Boxes, Insulated, and Diaphragm Pumps with Overboard Discharge (port and starboard)
Cockpit Tackle Center
HELM
Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface, Fold Out Fiberglass Footrest / Platform, and Safety Lanyard
316L Stainless Steel Steering Wheel with Control Knob and Non-Slip Grip on Sport Tilt Plus Helm
12V Panel with Illuminated Carling Rocker Switches
Single Windshield Wiper with Washer Control
Compass
Trim Tab Control Panel and Indicator
Waterproof Stereo Remote with Full Function Display
Glove Box Drawer with Dedicated Electronics Cover Storage
One (1) 12V Outlet and Dual USB Charger
Bow Thruster Joy Stick Control
Helm Drink Holders (2) in Side Panel
Helm Fire Extinguisher
Yamaha Command Link Plus Display
CONSOLE (PORT SIDE)
Patented Single Motion Dual Action Console Access Door with Gasket and 316L Stainless Steel Locking Latch
Cabin Entry Step
Molded Console Hull Liner with Pattern Area and Drainage
Molded Console Deck Liner
Dedicated Storage for Rods (4), Bow and Cockpit Tables, Safety Gear, and Hanging Locker
Padded Fishing Reel Protector for Rod Storage
Convertible Berthing Accommodations/Seating with Cushions
Opening Port Light with Screen
Two Switch Panel with Overhead LED Lights (3) LED Floor Accent Light (1)
Main Distribution Panel with Voltage Display
One 12V Outlet (1) and Dual USB Charger
One 120V Outlet (1) with GFI Protection
Fire Extinguisher
CO Monitor
HEAD (STARBOARD SIDE)
Patented Single Motion Dual Action Console Access Door with Gasket and 316L Stainless Steel Locking Latch
Enclosed Head Compartment
Vacuum Flush Electric Marine Head with 10 Gallon Holding Tank, Macerator Discharge Pump, 316L Stainless Steel Deck Pump-out Fitting and Bronze through Hull Fitting with Seacock
Fiberglass Toilet Seat Cover
Switch Panel with Overhead LED Light (1) LED Floor Accent Light (1)
Wet Gear Hanging Feature
Molded Sink with Corian Countertop, Vanity Mirror and Pull-out Hot/Cold Shower Wand
Under Sink Storage Locker
Shower Sump Box Drain with Automatic Discharge Pump
Toilet Tissue Holder
Towel Ring
One 120V outlet with GFI protection (1)
HARDTOP and WINDSHIELD
Molded Fiberglass Hardtop Integrated Visor
Powder Coated Aft Structural Hardtop Supports with Rod Holders (4)
Custom Windshield System with Tempered Glass and Articulating Center Vent
Custom Stainless Steel Ratcheting Anchor/Stern Light with Burgee Rings
Four (4) Tri Color LED Lights
Fore and Aft Facing Spreader Lights
316L Stainless Steel Fore/Aft Underside Grab Rails
60 mil Strataglass Side Curtains
Integrated Stereo Speakers (4)
Horn, Dual Trumpet
Port and Starboard Ventilation Hatches with Screens
Fiberglass Hardtop with Dedicated Radar, Antenna and Outrigger Locations
ELECTRICAL SYSTEMS
UL Rated Fully Tinned, Color Coded Copper Wire
Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
Custom In-House Built, One-Piece Electrical Harness with Water Proof Connectors and Chafe Protection
Powder Coated, Aluminum, Screen Printed (Front and Back) Battery Switch and Breaker Panel
Bonding System: Thru Hull Fittings Below Water Line, Trim Tabs, Zinc Anode and Garboard Drain
Four Battery System: Port Engine (1), Starboard Engine (1), House (1) (AGM), and Bow Thruster (1) (AGM)
Single 120V 30 AMP 60 Cycle Dockside Power
One 120V 30 AMP 50’ Dockside Power Cord
Two 120V Outlets (2) with GFI Protection
One (1) 40 Amp Battery Charger
Isolation Transformer
One Grounding Bus Bar
Electronics Fuse Block
Two 12V outlets (2) and Two USB Outlets (2)
MECHANICAL SYSTEMS
Molded Interior White Gel Coat
Molded Hatch with Gasket and Stainless Steel Gas Spring
Molded Bilge Sump Area
One Low Profile 900 GPH Bilge Pump with Integrated Float Switch, One 1500 GPH with Electronic Switch and Alarm with Stainless Steel Clad Composite Thru Hull Fittings
Fresh Water Pump with Filter
Raw Water Pump with Bronze Sea Strainer, Seacock and Thru Hull Fitting
Livewell Cyclone Pump with Bronze Sea Strainer
Teleflex Power Steering Pump
FUEL SYSTEM
EPA Compliant Lined 150 Gallon (port and stbd) Rotomolded Fuel Tanks (2) with Engine Pickups, Shutoff Valves, Digital Level Indicators and Deck Fuel Fill Plates
Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
Two (2) Yamaha Water Separating Fuel Filters with Primer Bulbs
WATER SYSTEM
30 Gallon Water Tank and 316L Stainless Steel Deck Fill Plate
Premium Sea Tech Color Coded Water Hose System with Mechanically Crimped Ends
Pressure Sensing/Variable Speed Pump
Fresh Water Distribution Manifold with Dedicated Valves
Dockside Fresh Water Inlet with Pressure Regulator
6 Gallon Stainless Steel Water Heater, 120V/60 Cycle
Cockpit Shower with Hot/Cold Mixing Valve
Similar Boats
More Fiberglass Fish
The See Dealer Cost Story
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Welcome To See Dealer Cost!
Get Product and Pricing Information for Free!
Register
Why? It's Free!
- Save Research
- Save Product Configurations
- Compare Configurations
- View Saved Price Quote Requests