Yamaha ATV YFZ450R 2016
Configuration and Pricing Guide

MSRP:
INVOICE:
  • Build Model
  • The Details
  • Similar Bikes, ATVs, 4 Wheelers and more
  • The See Dealer Cost Story
see dealer cost advertiser banner

Customize Your Yamaha ATV YFZ450R 2016
see dealer cost advertiser banner

Adaptor Plate, Air Filter - GYTR, Billet

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

Air Filter, High Flow - GYTR

High-flow gauze air filter increases performance throughout the entire power band and offers optimal airflow. Air lid can still be installed and is recommended for wet and muddy conditions. Washable and reusable. GYTR® Billet Air Filter Adaptor Plate required for installation. Service with Genuine Yamaha Gauze Filter Cleaner and Filter Oil, both available from your Yamaha dealer.

Air Filter, UNI - GYTR

Increased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall performance. The GYTR® UNI Air Filter can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.

Bar Webbing, Nerf

Available in three color options, this 1.5"-wide nylon webbing allows you to easily change the look of your Sport ATV or simply replace worn out, tattered webbing. Webbing fits accessory nerf bars only.

Bars, Nerf - Alumium

Aluminum frame construction with 1.5" nylon webbing. Meets all AMA® and ATVA® racing regulations. For closed-course competition only.

Battery

Now there is a much lighter alternative, the lithium-iron-phosphate (LiFePO4) batteries from Antigravity Batteries. While a traditional YTZ10 lead/acid battery for a YZF-R1 or YZF-R6 weighs about 8lbs, Antigravity’s equivalent lithium-iron battery weighs about 2 lbs, about 75% lighter and an easy savings of nearly 6 lbs! SIZE: Direct replacements for the OE battery with the same case dimensions and connectors, providing a perfect fit and 70-80% weight savings BETTER STARTING: Larger ignition spark and higher voltage on the starting pulse than a lead/acid battery NO MAINTENANCE: No liquids to spill and no trickle charging necessary to keep the battery charged DURABLE: Will not be damaged by vibration or heat like a lead/acid battery while also being completely waterproof NON-TOXIC: Chemical make-up does not contain highly toxic materials such as acid or lead WARRANTY: Manufacturer’s prorated one-year race limited warranty OptiMate Lithium-Iron Battery Charger, sold separately, required for charging this battery. Offered by Yamaha for closed-course competition applications only.

Chains, Ultra-High Performance - EK

GYTR Ultra-High Performance Racing Chains & Links by EK offer the ultimate balance of performance and durability for various applications. Chains will not work on vehicles with a shaft drive. Refer to the Sizing Chart and Specifications tabs for more information.

Clutch Inner Hub, GYTR - Billet

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

Clutch Pressure Plate, GYTR -Billet

Precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to a 30% weight reduction and less rotational mass for improved acceleration.

Cover, Sport ATV - Yamaha

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

Exhaust System, Race - GYTR

Developed through hours of dyno and track testing, this full system is the optimum exhaust system for the YFZ®450R and YFZ®450X. Features a hard-anodized oval aluminum muffler shell and a cone-style end cap. Completely rebuild able. Uses stock heat shield. Meets 99 dBA requirements. This accessory is restricted to closed-course competition only. This performance accessory does not meet California standards for off-road recreational vehicle usage regardless of model year.

Filter, Multi-Stage Foam - GYTR

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Genuine Yamaha Foam Filter Oil available from your Yamaha dealer. NOT AVAILABLE for use with GYTR Billet Air Filter Adaptor Plate.

Flag, Pop-It Whip Antenna

The most popular whip antenna on the market. The Pop-It Whip Antenna snaps together without tools for easy transportation and storage. Includes mounting bolt, 7’ x 1/4” pole, flag with Yamaha logo, and leash.

Footwell Extenstions, Plastic - GYTR

Designed to attach to the accessory GYTR Footwells. Made from high-impact plastic.

Footwells, GYTR - Aluminum

These GYTR® Aluminum Footwells are made from strong, lightweight aluminum-alloy construction. REQUIRED, the use of Plastic Footwell Extensions, sold separately.

Frame Glide Plate, GYTR - Plastic

This lightweight, 0.25"-thick polyurethane construction is much lighter than standard aluminum skid plates and helps protect frame, engine, and chassis components. The plate provides a smooth, slick surface so the ATV can “glide” over track obstacles. NOT AVAILABLE in conjunction with Aluminum Engine/Frame Skid Plate.

Grab Bar, Front - MX

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud. Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles. Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.

Grab Bar, Race - Front

The GYTR Race Front Grab Bar is constructed of 6063 aluminum alloy for the ultimate in protection and performance. 1"-diameter tubing provides protection to the shocks and radiator while offering a large hand hold to maneuver the machine in mud. Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles. Comes complete with AMA® regulation size number plate and mounting hardware.

Grab Bar, SE - Front

The SE Front Grab Bar helps provide protection to components on the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish.

Grab Bar, Sport Front - GYTR

The GYTR Sport Front Grab Bar features special ball-burnished aluminum tube construction with lower bash plate. The grab bar is designed to be both functional and sporty.

Handlebar, X-5 - 7/8"

The X-5 7/8" ATV Handlebar has a 5mm wall thickness that is optimized for strength and weight. Features include: Shot peened and anodized for durability Knurled left grip area to limit grip slippage Vinyl-covered bar pad gives it a “factory” look

Hour Meter, Deluxe - Yamaha

The Yamaha Engine Meter helps you keep track of your engine's operating hours. Also includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval. Works with all Yamaha 2-stroke and 4-stroke models, including Yamaha gasoline generators and pumps. Combined hour meter and tachometer option available for 4-stroke models only.

Hour Meter, Standard

This Standard Hour Meter is a must-have for logging time on your Yamaha engine. Hour meter function only (no service alerting function). Installs in minutes and is mounted in the engine compartment. Fits all Yamaha two-stroke and four-stroke gas models.

Kit, Air Induction System (AIS) Removal

This kit allows for the removal of the air induction system (AIS) from your ATV to provide weight reduction for closed-course competition only.

Kit, Clutch Plate - Yamaha

These complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Kit, High Compression Piston - GYTR

The GYTR® High Compression Piston Kit provides a performance boost throughout the RPM range while maintaining a high level of durability. Machined valve pockets provide additional valve clearance when used with higher lift camshafts. The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel. This accessory may be restricted to closed-course use. This performance accessory does not meet California standards for off-road recreational vehicle usage regardless of model year.

Kit, Quick-Release Fastener - Yamaha

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

Kit, Race Grab Bar Number Plate

The GYTR® Race Grab Bar Number Plate Kit includes a replacement AMA® regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

Lanyard, Racing - GYTR

The GYTR® Racing Lanyard is required for AMA®/ ATVA® sanctioned racing. This lanyard has stock connectors for easy installation. The direct-connect feature means a quick and neat installation with no cutting or splicing of wires.

Moto Gate

The Moto-Gate by Setwear is an universal expandable tailgate. Durable nylon mesh with rubber coated tie down hooks. Keeps tools, gear, bikes, ATVs in back of truck. Fully adjustable. Easy on, easy off. Fits most models of trucks. Full net set is rated at 1 ton and a breaking load of 3 tons; hooks are rated at 1 ton.

Mount, Universal Control - Techmount

New 4G design ball mount that fits all Metric and American bikes. 2-piece control clamp that fits on right or left side. For use with Tech Gripper (sold separately). Includes two options of spacers and mounting bolts for easy installation.

Mount, Universal Handlebar - Techmount

New 4G design ball mount that clamps to any size handlebar. Mounts to any available location on the handlebar. For use with Tech Gripper (sold separately). Includes inserts to fit 7/8”, 1”, and 1-1/4” bars.

Mount, Universal Stem - Techmount

New 4G design ball mount that fits most bikes with a hollow steering stem. Installs in minutes- no tools necessary. For use with Tech Gripper (sold separately). Includes 13mm, 16mm, 17mm, 18mm, 19mm and 24mm o-ring posts.

Mount, Universal Surface - Techmount

New 4G design ball mount designed to mount onto any flat surface at least 2” around. Ideal for your ATV, SxS or boat. Surface is sandwiched between the upper and lower plates. For use with Tech Gripper (sold separately).

Muffler, Slip On - Alumium

This slip-on muffler is designed to offer a boost in mid and top-end power. Features a hard-anodized oval aluminum muffler shell and a cone-style end cap, Completely rebuild able, Uses stock heat shield. Meets AMA®/ ATVA® 99bBA requirements. Replacement parts sold separately. This accessory is restricted to closed-course competition only.

Nerf Bar, Footwell and Peg Combination

Combines the nerf bars, footwells, and foot pegs into one accessory. 1.25"-diameter 6063 aluminum alloy tubing. Foot Pegs are 2.5" wide and 0.75" longer than stock with two height positions. (0.75" lower than stock or 1.25" lower than stock). Extruded joint clamp helps make installation and alignment a snap. 5° sweep for ultimate leverage, comfort, and clearance. Durable 1.5"-wide black nylon webbing in nerf bar and footwell areas. Meets all AMA® and ATVA® racing regulations. For closed-course competition only.

Pads, Side Fender Traction

The Side Fender Traction Pads by StompGrip™ have aggressive volcano profile bumps that aid riders feel in the leg and knee area. The Ultra-clear elastomer material allows application over graphics or directly to the tank and sides/fenders. The 3M™ adhesive prevents the edges from peeling up over time. The traction pads features an easy, peel-and-stick application.

Plug, Timing

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

Ported Cylinder Head Assembly

Through extensive development, with flow bench, dyno, and track testing, we achieved optimum power from our GYTR® ported cylinder head. Once we perfected the head flow characteristics, we meticulously digitized the ports to obtain the precise dimensions needed for CNC machining. Unlike flow variations inherent in hand porting, CNC porting lets us accurately reproduce this maximized flow design with every cylinder head manufactured. Cylinder head comes as a ready-to-install assembly, with valve train and GYTR® Performance Camshafts pre-assembled. Can be used with stock or GYTR® performance piston, sold separately. Used by the Yamaha Racing Team including 2009 ITP® QuadCross® Champion Dustin Nelson. This accessory is restricted to closed-course competition only.

Power Commander V - Dynojet Research

The Power Commander® V is loaded with tons of new features. Now less than half the size of the Power Commander® III USB and USB-powered from a computer, no longer requiring a 9-volt adaptor for programming. A 2-position map switching function comes built in (map switch not included). Gear input allows for map adjustment based on gear and speed. Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input, such as temperature. With gear position input connected, the PC V is capable of allowing each cylinder to be mapped individually and for each gear (e.g., on a 4-cylinder motorcycle with a 6-speed transmission there could be up to 24 separate fuel tables). Unit has a -100/ +250% fuel change range (up from -100/ +100%) and 10 throttle position columns (up from 9 on PC III USB). Also features an enhanced “accel pump” utility via increased adjustment and sensitivity ranges. For closed-course competition only.

Pre-Filter, GYRT

GYTR® Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

Ramp, Bi-Fold

The Bi-Fold ATV Ramp by Pro-Wheel features a convenient folding design for compact storage and transport. Aluminum construction optimizes both strength and weight. 1200 lb. weight capacity. Dimensions: 44” W x 71” L (folded - 22” x 71”). Do not exceed maximum load capacity for ramp. Ramp must be secured with straps before use. Use ramp on stable and level surface only. Read all warning labels on ramp before use.

Ramp, Tri-Fold

The Tri-Fold ATV Ramp by Pro-Wheel® features a convenient tri-folding design for compact storage and transport. Aluminum construction optimizes both strength and weight. 1,200 lb. weight capacity. Dimensions: 48” width, 84” length (folded - 15” x 84”). NOTE: Do not exceed maximum load capacity for ramp. Ramp must be secured with straps before use. Use ramp on stable and level surface only. Read all warning labels on ramp before use.

Skid Plate, Engine/Frame - Aluminum

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. NOT AVAILABLE with Plastic Frame Glide Plate.

Skid Plate, Swing Arm - Aluminum

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

Skid Plates, A-Arm - Aluminum

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

Sprockets, Front- Talon

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances. Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on ’06 and later models because regulated exhaust emissions are affected.

Sprockets, Rear - Talon

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

Steering Stabilizer

GPR® Stabilizers are precision-machined for proven reliability and superior quality. Kit comes with the GPRV1 stabilizer and billet-machined mounting brackets. The patented "pin-less" mounting brackets eliminates any slop that might normally exist with the traditional aftermarket pin-and-slot mounting systems. Easy installation provides bolt-on performance. No drilling, tapping, or welding required. Intended to fit with OEM bars.

Straps, M1 Utility/Wheel

These wheels straps are perfect for trailers to hold your wheels in place and for general multi-purpose usage. The straps are made from abrasion-resistant nylon webbing and all stitching is double-stitched square/cross with heavy-duty nylon thread. A heavy-duty steel cam-lock with tough steel spring provides a secure lock to keep things tight. Features Yamaha and Matrix™ graphics. Sold in pairs. Utility straps measure 40" long x 1" wide and the wheel straps measure 30" long x 1" wide.

Tie Downs, Cam Buckle - Yamaha

The Yamaha Cam Buckle Tie Downs are 1" x 6' with 1" cam lock buckle. Straps are rated for 400 lb. working and 1200 lb. break strength. (Sold in pairs).

Tie Downs, Integra Classic

The Integra® Classic tie down incorporates a soft hook extension to the fixed end of the tie down to loop around larger diameter handlebars, frame member, triple tree clamp or other structural point. Overall length is 69", and made with abrasion-resistant nylon webbing and vinyl-coated hooks. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, Integra Rat Pack

The Integra® Rat Pak is the same high-quality tie down as the Rat Pak, except the Integra has a built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps, and other structural members. It’s constructed of abrasion-resistant nylon webbing with two vinyl-coated hooks. Overall length is 5-1/2'. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, M1 1.0" Worx

The M1 1.0" WORX Tie Down by Matrix Concepts™ is a premium tie down set with top soft loop hook, bottom swivel carabineer and Yamaha graphics. Other features include: Overall length is 69” x 1”wide. Made from abrasion-resistant nylon webbing. Double-stitched square/cross with heavy-duty nylon thread. Soft hoop top with bottom rubber coated “S” hook incorporated into design to protect your handlebars. Custom spring loaded lock-on “swivel carabineer” bottom hook for secure connection. Heavy-duty steel “cam-lock” with tough steel spring for a secure lock. Assembly strength is 1,200 lbs. and a 400 lb. load limit.

Tie Downs, M1 1.5" Phatty

The M1 1.5" Phatty Tie Down by Matrix Concepts™ is a premium tie down set with top soft loop hook, bottom swivel carabineer and Yamaha graphics. Other features include: Overall length is 69” x 1.5” wide. Made from abrasion-resistant nylon webbing. Double-stitched with square/cross with heavy-duty nylon thread. Top soft loop extension with rubber coated “S” hook incorporated into design to protect your handlebars. Custom spring loaded lock-on “swivel carabineer” bottom hook for secure connection. Heavy-duty steel “cam-lock” with tough steel spring for a secure lock. Assembly strength is 1,400 lbs. and a 500 lb. load limit.

Tie Downs, Original

The Original Tie Downs by ANCRA® set the standard with its features that includes: 5-1/2' long. Constructed of abrasion-resistant nylon webbing. Premium heavy-duty 1" cam buckle. Zinc cam and pressure plate to reduce webbing abrasion. Vinyl-coated hooks. 1200 lb. assembly strength with 400 lb. working load limit. Sold in pairs.

Tie Downs, Rat Pack

The Rat Pak Tie Downs are ideal when greater tensioning power is needed. It incorporates Ancra’s 1" ratchet buckle, nylon webbing, vinyl coated hooks with an overall length of 5-1/2'. Assembly strength is 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, Ratcheting - Yamaha

The Yamaha Ratcheting Tie Downs are 1" x 10? with 1" rubber handle ratchet. Straps are rated for 400 lb., working and 1200 lb. break strength. (Sold in pairs).



see dealer cost advertiser banner