Yamaha ATV Raptor 700 2016
Configuration and Pricing Guide

MSRP:
INVOICE:
  • Build Model
  • The Details
  • Similar Bikes, ATVs, 4 Wheelers and more
  • The See Dealer Cost Story
see dealer cost advertiser banner

Customize Your Yamaha ATV Raptor 700 2016
see dealer cost advertiser banner

Adaptor Plate, Air Filter - GYTR, Billet

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

Air Filter, High Flow - GYTR

High-flow gauze air filter increases performance throughout the entire power band and offers optimal airflow. Air lid can still be installed and is recommended for wet and muddy conditions. Washable and reusable. GYTR® Billet Air Filter Adaptor Plate required for installation. Service with Genuine Yamaha Gauze Filter Cleaner and Filter Oil, both available from your Yamaha dealer.

Bar Webbing, Nerf

Available in three color options, this 1.5"-wide nylon webbing allows you to easily change the look of your Sport ATV or simply replace worn out, tattered webbing. Webbing fits accessory nerf bars only.

Bars, Nerf - GYTR

The GYTR® Nerf Bars for Raptor 700 has a rugged, yet lightweight aluminum frame for maximum support. Available in natural aluminum or black finish. Webbing sold separately. Meets AMA® / ATVA® regulations. For closed-course competition only.

Blaster FI Ignition and Fuel Controller

The Blaster FI allows racers to edit the fuel and ignition maps, accelerator pump, and rev limit functions. Easily plugs into the stock wiring harness with direct plug-in factory style connectors. With a simple turn of a dial, you can change to one of ten tunes that can be stored in the Blaster FI. 100 different adjustment points for fuel and ignition timing. Connects to your PC via a USB port to create your own custom maps with the provided Windows-based MSD® View software. Comes with custom aluminum bracket that allows the Blaster FI to be mounted above the air filter. For closed-course competition use only.

Cap, Oil Fill

Anodized 6061 billet aluminum plug replaces stock plastic cap.

Chains, Ultra-High Performance - EK

GYTR Ultra-High Performance Racing Chains & Links by EK offer the ultimate balance of performance and durability for various applications. Chains will not work on vehicles with a shaft drive. Refer to the Sizing Chart and Specifications tabs for more information.

Clutch Basket, GYTR - Billet

The GYTR® Billet Clutch Basket is precisioned machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface. This clutch basket provides amazing, race-proven durability.

Clutch Inner Hub, GYTR - Billet

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

Clutch Pressure Plate, GYTR -Billet

Precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to a 30% weight reduction and less rotational mass for improved acceleration.

Cover, Seat

The Seat Cover by Quad Tech™ was developed with the assistance of Yamaha ATV racers. The feedback from the racers are based off their extensive testing on the national circuits has yielded a superior product. The seat cover is handmade and constructed with high-quality materials for the best performance available. Panels are cut to match high-wear and rider-comfort areas, with extra padding sewn in key areas that improves the durability of the cover.

Covers, Shock - GYTR

The GYTR® Shock Covers helps protect against rocks and debris. The heat-venting holes are included for maximum performance. Easy to install and remove.

Filter, Multi-Stage Foam - GYTR

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Genuine Yamaha Foam Filter Oil available from your Yamaha dealer. NOT AVAILABLE for use with GYTR Billet Air Filter Adaptor Plate.

Flag, Pop-It Whip Antenna

The most popular whip antenna on the market. The Pop-It Whip Antenna snaps together without tools for easy transportation and storage. Includes mounting bolt, 7’ x 1/4” pole, flag with Yamaha logo, and leash.

Footwell Extenstions, Plastic - GYTR

Designed to attach to the accessory GYTR Footwells. Made from high-impact plastic.

Footwells, GYTR - Aluminum

These GYTR® Aluminum Footwells are made from strong, lightweight aluminum-alloy construction. REQUIRED, the use of Plastic Footwell Extensions, sold separately.

Footwells, SE

The Raptor® 700R Special Edition Footwells are constructed of black powder-coated aluminum tube and plate. The footwells features a unique “R” punch-through design that enhances the complete styling of the Raptor 700R. Requires the use of the Plastic Footwell Extensions.

Frame Glide Plate, GYTR - Plastic

This lightweight, 0.25"-thick polyurethane construction is much lighter than standard aluminum skid plates and helps protect frame, engine, and chassis components. The plate provides a smooth, slick surface so the ATV can “glide” over track obstacles. NOT AVAILABLE in conjunction with Aluminum Engine/Frame Skid Plate.

Grab Bar, Rear

The Rear Grab Bar is made of special ball-burnished aluminum tube construction. Flag/whip mounting tab is included.

Grab Bar, SE - Front

The SE Front Grab Bar helps provide protection to components on the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish.

Grab Bar, Sport Front - GYTR

The GYTR Sport Front Grab Bar features special ball-burnished aluminum tube construction with lower bash plate. The grab bar is designed to be both functional and sporty.

Guard, Radiator - Aluminum

The Aluminum Radiator guard helps keep your radiator protected from rocks and other debris. Made of lightweight expanded aluminum with a fully boxed, welded frame and center support for heavy-duty application.

Handlebar, X-5 - 7/8"

The X-5 7/8" ATV Handlebar has a 5mm wall thickness that is optimized for strength and weight. Features include: Shot peened and anodized for durability Knurled left grip area to limit grip slippage Vinyl-covered bar pad gives it a “factory” look

Head Pipe, PowerBomb - GYTR

The Stainless Steel PowerBomb™ is a four-stroke header that incorporates the patented PowerBomb™ module at a precise location in the initial stage of the header. By positioning this “Bomb” at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. The result is a flow increase of nearly 10%! The outer chamber in the PowerBomb™ allows the air to expand, cool, and ramp back up at a higher velocity. Additionally, the PowerBomb™ is a “pre-muffler” of sorts, which helps to lower the bike’s sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). The PowerBomb™ provides power focused in the mid to upper rpm range. This accessory is restricted to closed-course use.

Hour Meter, Deluxe - Yamaha

The Yamaha Engine Meter helps you keep track of your engine's operating hours. Also includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval. Works with all Yamaha 2-stroke and 4-stroke models, including Yamaha gasoline generators and pumps. Combined hour meter and tachometer option available for 4-stroke models only.

Hour Meter, Standard

This Standard Hour Meter is a must-have for logging time on your Yamaha engine. Hour meter function only (no service alerting function). Installs in minutes and is mounted in the engine compartment. Fits all Yamaha two-stroke and four-stroke gas models.

Kit, Clutch Plate - Yamaha

These complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Kit, Graphics - GYTR

The GYTR® ATV Graphic Kits by ONE Industries® exclusive Yamaha design features durable 15-mil vinyl material with 3M™ adhesive. It allows riders to easily personalize their ATV. Provides protection to the tank and shroud area. The graphic kit includes decals for the tank, shroud, front cowl, front fenders, and rear fenders.

Kit, Graphics - GYTR Raptor

The GYTR® Raptor Graphic Kits are designed to enhance the look of the Raptor 700 (seat cover not included). This factory style graphic kit was inspired by the Factory SX/ MX race team graphic.

Kit, Performance Brake Line

Russell's Cycleflex hoses feature the PowerFlex Hose that utilizes a Telfon® inner liner supported by a rugged 308 stainless steel outer jacket. This combination ensures a lightweight assembly that withstands prolonged flexing, aging, and vibration without expansion. Precision double-crimp technology ensures permanent end attachment with precise alignment for ease of installation and un uncompromised fit. Yamaha exclusive smoked tint covers with black finished ends. Part numbers for front and rear lines can be found in the Specifications tab.

Lanyard, Racing - GYTR

The GYTR® Racing Lanyard is required for AMA®/ ATVA® sanctioned racing. This lanyard has stock connectors for easy installation. The direct-connect feature means a quick and neat installation with no cutting or splicing of wires.

Moto Gate

The Moto-Gate by Setwear is an universal expandable tailgate. Durable nylon mesh with rubber coated tie down hooks. Keeps tools, gear, bikes, ATVs in back of truck. Fully adjustable. Easy on, easy off. Fits most models of trucks. Full net set is rated at 1 ton and a breaking load of 3 tons; hooks are rated at 1 ton.

Mount, Universal Control - Techmount

New 4G design ball mount that fits all Metric and American bikes. 2-piece control clamp that fits on right or left side. For use with Tech Gripper (sold separately). Includes two options of spacers and mounting bolts for easy installation.

Mount, Universal Handlebar - Techmount

New 4G design ball mount that clamps to any size handlebar. Mounts to any available location on the handlebar. For use with Tech Gripper (sold separately). Includes inserts to fit 7/8”, 1”, and 1-1/4” bars.

Mount, Universal Stem - Techmount

New 4G design ball mount that fits most bikes with a hollow steering stem. Installs in minutes- no tools necessary. For use with Tech Gripper (sold separately). Includes 13mm, 16mm, 17mm, 18mm, 19mm and 24mm o-ring posts.

Mount, Universal Surface - Techmount

New 4G design ball mount designed to mount onto any flat surface at least 2” around. Ideal for your ATV, SxS or boat. Surface is sandwiched between the upper and lower plates. For use with Tech Gripper (sold separately).

Muffler, PowerCore 4

The PowerCore®4 is designed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial no matter what your riding style or ability is. Features include space-age internal packing for maximum packing life. High-flow modular end cap. Internal core shape uses high-flow technology. Enhanced sonic evacuation provides for higher flow and increased power. Includes removable spark arrestor.

Plug, Timing

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

Power Commander V - Dynojet Research

The Power Commander® V is loaded with tons of new features. Now less than half the size of the Power Commander® III USB and USB-powered from a computer, no longer requiring a 9-volt adaptor for programming. A 2-position map switching function comes built in (map switch not included). Gear input allows for map adjustment based on gear and speed. Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input, such as temperature. With gear position input connected, the PC V is capable of allowing each cylinder to be mapped individually and for each gear (e.g., on a 4-cylinder motorcycle with a 6-speed transmission there could be up to 24 separate fuel tables). Unit has a -100/ +250% fuel change range (up from -100/ +100%) and 10 throttle position columns (up from 9 on PC III USB). Also features an enhanced “accel pump” utility via increased adjustment and sensitivity ranges. For closed-course competition only.

Pre-Filter, GYRT

GYTR® Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

Ramp, Bi-Fold

The Bi-Fold ATV Ramp by Pro-Wheel features a convenient folding design for compact storage and transport. Aluminum construction optimizes both strength and weight. 1200 lb. weight capacity. Dimensions: 44” W x 71” L (folded - 22” x 71”). Do not exceed maximum load capacity for ramp. Ramp must be secured with straps before use. Use ramp on stable and level surface only. Read all warning labels on ramp before use.

Ramp, Tri-Fold

The Tri-Fold ATV Ramp by Pro-Wheel® features a convenient tri-folding design for compact storage and transport. Aluminum construction optimizes both strength and weight. 1,200 lb. weight capacity. Dimensions: 48” width, 84” length (folded - 15” x 84”). NOTE: Do not exceed maximum load capacity for ramp. Ramp must be secured with straps before use. Use ramp on stable and level surface only. Read all warning labels on ramp before use.

Skid Plate, Engine/Frame - Aluminum

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. NOT AVAILABLE with Plastic Frame Glide Plate.

Skid Plate, Swing Arm - Aluminum

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

Skid Plates, A-Arm - Aluminum

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

Sprockets, Front- Talon

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances. Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on ’06 and later models because regulated exhaust emissions are affected.

Sprockets, Rear - Talon

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

Straps, M1 Utility/Wheel

These wheels straps are perfect for trailers to hold your wheels in place and for general multi-purpose usage. The straps are made from abrasion-resistant nylon webbing and all stitching is double-stitched square/cross with heavy-duty nylon thread. A heavy-duty steel cam-lock with tough steel spring provides a secure lock to keep things tight. Features Yamaha and Matrix™ graphics. Sold in pairs. Utility straps measure 40" long x 1" wide and the wheel straps measure 30" long x 1" wide.

Tie Downs, Cam Buckle - Yamaha

The Yamaha Cam Buckle Tie Downs are 1" x 6' with 1" cam lock buckle. Straps are rated for 400 lb. working and 1200 lb. break strength. (Sold in pairs).

Tie Downs, Integra Classic

The Integra® Classic tie down incorporates a soft hook extension to the fixed end of the tie down to loop around larger diameter handlebars, frame member, triple tree clamp or other structural point. Overall length is 69", and made with abrasion-resistant nylon webbing and vinyl-coated hooks. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, Integra Rat Pack

The Integra® Rat Pak is the same high-quality tie down as the Rat Pak, except the Integra has a built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps, and other structural members. It’s constructed of abrasion-resistant nylon webbing with two vinyl-coated hooks. Overall length is 5-1/2'. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, M1 1.0" Worx

The M1 1.0" WORX Tie Down by Matrix Concepts™ is a premium tie down set with top soft loop hook, bottom swivel carabineer and Yamaha graphics. Other features include: Overall length is 69” x 1”wide. Made from abrasion-resistant nylon webbing. Double-stitched square/cross with heavy-duty nylon thread. Soft hoop top with bottom rubber coated “S” hook incorporated into design to protect your handlebars. Custom spring loaded lock-on “swivel carabineer” bottom hook for secure connection. Heavy-duty steel “cam-lock” with tough steel spring for a secure lock. Assembly strength is 1,200 lbs. and a 400 lb. load limit.

Tie Downs, M1 1.5" Phatty

The M1 1.5" Phatty Tie Down by Matrix Concepts™ is a premium tie down set with top soft loop hook, bottom swivel carabineer and Yamaha graphics. Other features include: Overall length is 69” x 1.5” wide. Made from abrasion-resistant nylon webbing. Double-stitched with square/cross with heavy-duty nylon thread. Top soft loop extension with rubber coated “S” hook incorporated into design to protect your handlebars. Custom spring loaded lock-on “swivel carabineer” bottom hook for secure connection. Heavy-duty steel “cam-lock” with tough steel spring for a secure lock. Assembly strength is 1,400 lbs. and a 500 lb. load limit.

Tie Downs, Original

The Original Tie Downs by ANCRA® set the standard with its features that includes: 5-1/2' long. Constructed of abrasion-resistant nylon webbing. Premium heavy-duty 1" cam buckle. Zinc cam and pressure plate to reduce webbing abrasion. Vinyl-coated hooks. 1200 lb. assembly strength with 400 lb. working load limit. Sold in pairs.

Tie Downs, Rat Pack

The Rat Pak Tie Downs are ideal when greater tensioning power is needed. It incorporates Ancra’s 1" ratchet buckle, nylon webbing, vinyl coated hooks with an overall length of 5-1/2'. Assembly strength is 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Tie Downs, Ratcheting - Yamaha

The Yamaha Ratcheting Tie Downs are 1" x 10? with 1" rubber handle ratchet. Straps are rated for 400 lb., working and 1200 lb. break strength. (Sold in pairs).



see dealer cost advertiser banner