- Home
- Marine
- Carver Yachts 2015
- Carver Yachts C43 Coupe 2015
Carver Yachts C43 Coupe 2015
Configuration and Pricing Guide
MSRP:
INVOICE:
- Build Model
- The Details
- Similar Boats
- The See Dealer Cost Story
Manufacturer Info
Carver Yachts C43 Coupe 2015 Info
2015 Carver Yachts C43 Coupe
Length Overall 42&39; 0"
Beam 13&39; 10"
Draft 3&39; 7"
Weight 24,150 lbs.
Bridge Clearance 10&39; 10"
Fuel Capacity 350 Gallons
Water System 131 Gallons
Holding Tank 70 Gallons
ConstructionHull, Deck & Superstructure: Hand-laid structural and non-structural fiberglass and core laminates bonded with infused epoxy resin.
Hull bottom: Surface beneath the water line is bead blasted to create an optimal bonding surface for the anti-fouling paint which is sprayed
onto the hull to create a smooth running bottom.
Stringer System: Fiberglass stringers are used throughout the yacht.
Interior bulkheads, cabinets and drawers are precision cut, hand crafted and constructed from a selection of woods and high-pressure
laminates. Drawers are lined with laminate.
Integral aluminum truss reinforcement in cabin top structure.
Electrical
12V System: Powered by an array of Series 31, 12V batteries. Array includes two dedicated engine starting batteries and one dedicated “house”
battery. Battery banks are charged by a 60 amp charger for each bank. System voltmeters are located on the ship’s 12V distribution panel and
voltmeters at the helm station. Battery on/off switch for the house battery is installed in the salon and the selector switch for engine batteries is
located in the engine compartment.
110V System: System consists of a 30-amp service supported by Marinco® 50’ (15.2 m) shore power cord. Ground fault circuit interrupters are
incorporated into the onboard system.
Television: Cable television is supported by onboard inlets in the salon and master stateroom and a 50’ (15.2 m) CATV cable to connect
to shore outlet.
Propulsion
Engines: Twin Cummins 6.7 L, 380 HP diesel inboard engines with direct coupled v-drives. Each engine’s exhaust is routed to a Hydralift muffler
and underwater exhaust port.
Shafts and Shaft Logs: Aquamet® 1.75” (3.8 cm) diameter stainless steel propeller shafts. Tides Marine® SureSeal shaft logs are self-aligning,
dripless and maintenance free. Sacrificial anodes are installed on each shaft.
Rudders and Propeller Struts: Made from durable 421 Manganese bronze.
Propellers: 22” (55.9 cm), four blade, Nibral propellers.
Fuel Tanks: Twin, 5052 aluminum tanks hold 175 gal. (662.4 L) of fuel each. Port and starboard fuel fill deck fittings.
Trim Tabs: Bennett Marine® stainless steel, electro-hydraulic trim tabs.
Steering: Teleflex® SeaStar hydraulic steering.
Helm Display: Digital LCD display showing tachometer, hour meter, oil pressure, coolant temperature, battery voltage, fuel tank level and
rudder angle indicator.
Fresh Water & Holding Systems
Fresh Water System: Three 40 gal. (151.4 L) polyethylene tank with shore water connection and integrated pressure reduction valve.
Fresh water fill fitting installed on walkway. Eleven gal. (41.6 L) water heater installed in engine compartment.
On demand fresh water is delivered via a fresh water pump installed in the engine compartment.
Decks & Hardware
Rails: 1” (2.5 cm) 316 stainless steel rails are used throughout the vessel. Rail stanchion bases are secured using aluminum backing plates
laminated into the deck’s fiberglass layup.
Mooring Cleats: 10” (25 cm) mooring cleats are used at the bow, stern and amid ship (total of nine cleats). Cleats are secured using aluminum
backing plated fused into the vessel’s laminate.
Foredeck Access: Wide walkways are on each side of the cabin top and provide safe, secure access from the cockpit to the foredeck.
Foredeck Hatch with screen.
Safety & Navigation
Bilge Pumps: Two 1,500 gal. (5678 L) per hour automatic bilge pumps are installed, each with a manual on/off switch at the helm. A float switch
for the high bilge water alarm is installed in the engine compartment and forward bilge.
Bilge Ventilation: Four ventilator blowers are installed in the engine compartment. Each blower creates 240 CFM volume.
CO Alarms: Monitors with alarms are installed in both staterooms and the salon.
Engine Alarms: Engine oil pressure and water temperature alarms are installed at the helm.
Fire Suppression System: An FE241 Fireboy® automatic fire suppression system is installed in the C43’s engine compartment.
Compass: 2.75” flush mount, illuminated Richie® Navigator compass is mounted at the helm.
Seacocks: Marine grade bronze seacocks are used on all below the waterline thru hull openings. Nylon fittings are used on above
the waterline outlets.
Spotlight: ITT Jabsco® remote control spotlight mounted on bow rail.
Helm
Dual helm seat, adjustable.
Compass.
Sport steering wheel.
12V accessory outlet.
Provisions for optional navigation equipment including RayMarine E120 display with GPS, chart plotter, depth sounder, radar, VHF
and autopilot.
Windshield defogging fans.
Dual speed controlled/intermittent windshield wipers and washers.
12V switch control panel.
Remote control spotlight.
Hydraulic steering with tilt steering wheel.
Dash console, non-glare.
Electronic engine controls.
Trim Tab controls.
LCD engine information display.
Cockpit/Transom/Swim Deck
Swim Platform: Integrated into the yacht’s hull and deck. Access to the cockpit from the swim platform is through a transom door on the
starboard side of the yacht. Telescoping boarding ladder is installed in recessed area of swim platform.
Transom: Stainless steel handrail on top of transom. Two storage lockers in aft surface of transom.
Engine Compartment Access: Hinged cockpit floor hatch with gas shock cylinder.
Courtesy Lights: Four cockpit courtesy lights with on/off switch.
Two storage lockers, port and starboard side.
Storage access under all cockpit seating.
Shore water connection.
Dual stereo speakers.
Overhead LED lights.
Cockpit Lounge: L-shaped lounge seat to port with single seat on starboard.
Salon
Entertainment: 32” LED Television, DVD/CD player, AM/FM marine quality stereo with speakers.
Lighting: Eight LED lights are recessed into the salon head liner and are controlled by a rocker switch.
Seating: U-shaped upholstered lounge with storage underneath seating. High/Low dining table with filler cushion.
Ventilation: Salon windows slide open.
Storage: Hinged door in salon floor provides access to spacious storage compartment.
Flooring: Plush pile, 100% nylon carpeting throughout salon.
CO Detector.
Retractable sunroof with shade.
Galley
Counter Tops: Solid surface countertops throughout.
Flooring: “Dusky Walnut”; vinyl plank flooring.
Appliances: Novacool® refrigerator, convection microwave oven, two burner electric cooktop with ventilator.
Sink: Full-size stainless steel sink.
Lighting: Five recessed LED lights over galley counter controlled by rocker light switch.
110 Outlet: GFI protected 110V outlet.
Master Stateroom
Sleeping: Queen size, island berth with high-density foam mattress. Dual end tables and halogen sconce style reading lights.
Privacy: Master stateroom is secured with a hinged wooden door and locking door latch.
Storage: Port and starboard overhead lockers. Port and starboard hanging lockers.
CO detector.
Ventilation: Opening overhead hatch with screen and egress ladder.
Lighting: Natural light provided by overhead hatch and two 5.5” by 36” hull side windows with blinds. Additional illumination provided by six
overhead 12V lights recessed in the headliner and controlled by a rocker switch and two sconce reading lights.
Flooring: Plush pile 100% nylon carpeting throughout.
Guest Stateroom
Sleeping: Twin berths with high-density foam mattresses. Filler cushion converts twin berths to full size mattress.
Flooring: Plush pile 100% nylon carpeting throughout.
Privacy: Guest Stateroom is secured with a hinged wooden door and locking door latch.
Lighting: Illumination is provided by three recessed overhead LED lights controlled by a rocker switch. Two bedside reading lights. Natural light
and ventilation provided by one 11” hull side window with opening port light with screen.
Hanging locker with illumination and mirror.
Master Head Compartment
Shower: Fiberglass stall shower with hinged aluminum and acrylic door. Shower head can be used as a hand shower. Sump drain with
automatic pump. Exhaust fan. LED overhead light. Molded non-skid floor.
Toilet: Raritan® electric pedestal toilet with freshwater flush.
Two 7.5” by 20” hull side windows with opening port lights with shades.
Vanity: Vanity is equipped with vessel sink, under sink storage, solid surface counter top, mirrored cabinet.
Lighting: Two LED lights recessed in the headliner and controlled by wall mounted rocker switch.
Electrical: 110V GFI protected outlet.
Day Head
Shower: Hand held shower with curtain. Sump drain with automatic pump. Exhaust fan. LED overhead light. Molded non-skid floor.
Toilet: Raritan® electric pedestal toilet with freshwater flush.
Two 7.5” by 20” hull side windows with opening port lights with shades.
Vanity: Vanity is equipped with vessel sink, under sink storage, solid surface counter top, mirrored cabinet.
Lighting: Two LED lights recessed in the headliner and controlled by wall mounted rocker switch.
Electrical: 110V GFI protected outlet.
Carver Yachts C43 Coupe
More Information Can Be Found At: Carver Yachts
Similar Boats
More Yachts
The See Dealer Cost Story
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Welcome To See Dealer Cost!
Get Product and Pricing Information for Free!
Register
Why? It's Free!
- Save Research
- Save Product Configurations
- Compare Configurations
- View Saved Price Quote Requests