- Home
- Marine
- Nitro Boats 2020
- Nitro Boat Z Series Z21 Pro 2020
Nitro Boat Z Series Z21 Pro 2020
Configuration and Pricing Guide
MSRP:
INVOICE:
- Build Model
- The Details
- Similar Boats
- The See Dealer Cost Story
* I agree that SeeDealerCost and its Certified Dealers may communicate with me via email, text, or phone. My consent to these terms is not a condition of any purchase. Message & data rates may apply. You can reply STOP to opt-out of further messaging.
Standard Equipment
Length (ft/in): 21'2"
Beam (ft/in): 7'11"
Bottom width (ft/in): 6'2"
Max recommended HP: 300
Fuel capacity (gal): 55
Max capacity (persons): 4
Max weight (lbs): 825
Max person, motor and gear weight (lbs): 1,800
Interior depth (in): 18.5"
Transom height (in): 22.5"
Deadrise (degrees): 16 °
Draft (in): 16"
Average dry weight (lbs): 2,150
Average package weight (lbs): 4,050
Package height (ft/in): 6'3"
Package width (ft/in): 8'6"
Towing length (ft/in): 27'11"
Storage length (ft/in): 24'4"
Nitro Boat Z Series Z21 Pro 2020 Info
STANDARDS
PRO
Bow Humminbird SOLIX 10 DI G2 gimbal-mounted fishfinder
Console Humminbird SOLIX 12 SI G2 flush-mounted fishfinder
2 Minn Kota 10’ (3.05 m) Talon shallow-water anchors-Black (bracket mounted, dealer installed)
Minn Kota Ultrex 36V, 112-lb. (50.80 kg) thrust, 45” (1.14 m) shaft trolling motor with Universal Sonar 2 and i-Pilot Link
3-way Ethernet communication between bow and console fishfinders and trolling motor
Power-adjust pneumatic lumbar support for driver’s seat
T-H Marine G-Force Conservation livewell culling system
Factory-applied keel protector
2 automatic bilge pumps
Hot Foot throttle
Pro-Trim lever
4-bank, 40-amp battery charger
1 extra trolling battery
Retractable transom trailer tie downs
COMFORT/CONVENIENCE
NMMA certified
Flotation meets or exceeds NMMA and U.S. Coast Guard requirements
EPA-compliant fuel system
Anti-fatigue, padded comfort bow deck
Non-skid bow and stern mats
Spare prop holder
5 drink holders
4 stainless steel pull-up cleats
4 grab handles (1 at each seat)
Fire extinguisher
Horn
Paddle
LIVEWELL SYSTEMS
2 aft 19-gal. (71.92 L) insulated GUARDIAN livewells with digital timers
750 GPH (2,839.06 LPH) livewell recirculation/pump-out system
500 GPH (1,892.71 LPH) aerator/fill pump
Oxygen generator in each livewell
Dual remote drain controls
Rotomolded with rounded corners
TROLLING MOTOR
Minn Kota Maxxum 24V, 80-lb. (36.29 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
Trolling motor pedal recess
CONSOLE
Modular, aerodynamic console design with expanded leg clearance and larger fishfinder surface
Lowrance Elite-7 TI2 Combo flush-mounted fishfinder with GPS
Touchscreen switch panel with 1-touch boat controls including First Fish, Nite Mode, master power, trim, lighting, bilge, livewells and more
Key fob remote with First Fish, Nite Mode, master power on/off and trim
First Fish feature fills and recirculates livewell with 1 touch for stress-free livewell prep
Hydraulic steering with tilt
Removable acrylic, tinted windscreen
Ready to accept optional removable port console
Veethree multifunction instrumentation with speedometer/fuel gauge, tach/trim gauge, voltmeter gauge and water pressure gauge
Dash light dimmer
LED courtesy light
Below-console RAM X-Grip phone holder and 12V outlet
INTERIOR
45-sq.-ft., (4.2-sq.-m) anti-fatigue, padded bow deck for comfort and mobility
Bike seat with hydraulic pedestal
Folding fishing seat with composite frame and hydraulic pedestal
Z-CORE seating system with Force Flex suspension and contoured, rotomolded frame for driver and passenger seats
Adjustable sliding driver and passenger seats with removable center seat cushion
Bow port and starboard rod hold-down straps
Molded-in drainage channels around bow storage compartments
Oversized, lockable bow port and starboard rod lockers with lift assists for rods up to 8&39; (2.44 m)
Tapered rod tubes in port rod locker to protect rod tips
Oversized lockable bow center storage locker with TACKLE MANAGEMENT SYSTEM
2 large, lockable bow center storage lockers with lift assists
Bow center magnetic under-lid lure organizer
Step to bow deck with 86-qt. (81.39 L) insulated cooler, removable trash receptacle and snap-in sandwich tray
Partner rod ramp with rod handle organizer and hold-down strap
Port below-console pull-out storage drawer
Footrest with non-skid mat under console(s)
Designated net storage behind seating
Built-in tournament ruler and holder
2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
Molded utility rigging compartment for easy access to batteries and pumps and easy cleanup
Lift-out tool/rope storage tray in rigging compartment
Insulated aluminum lids with welded corners
24-oz. (.68 kg) plush, marine-grade cut pile carpet on deck and floor
Stainless steel lockable latches
PERFORMANCE
16° variable deadrise hull
RAPID PLANING SYSTEM (RPS) for quicker holeshots and maximized speed
12" (30.48 cm) adjustable jack plate
Rigging tube for organized wiring and abrasion resistance
Stainless steel propeller
CONSTRUCTION/EXTERIOR
100% composite deck core with superior thermal stability and strength-to-weight ratio
Deck and hull chemically bonded and mechanically fastened with stainless steel fasteners every 2" (5.08 cm)
Gelcoated stringer/liner system
Foam-filled hull for optimal buoyancy and safety
Full-width fiberglass-encapsulated composite transom
Low-profile gunnels to maximize deck size and for easier casting
Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
ELECTRICAL
Bow panel with trolling motor receptacle, anchor/light switch, trim switch and capability to flush mount 10" (25.4 cm) fishfinder
1,600 GPH (6,056.66 LPH) bilge pump
Automatic bilge
LED console courtesy light
Manual LED-lighted bow gear storage
Automatic LED-lighted port and starboard bow rod storage
Automotive-style labeled fuse panel with cover
Interstate cranking battery
2 heavy-duty Interstate trolling batteries
3-bank, 30-amp onboard battery charger with exterior receptacle
6-gauge trolling motor wiring with 50-amp circuit breaker
E-Start emergency jump start system
Master power switch
Ventilation fan system in bow storage
Waterproof Deutsch plugin gauge connectors
Water/abrasion-resistant connectors
TRAILER
Custom-fit, tandem-axle NITRO trailer powder-coated with GALVASHIELD Impact corrosion and chip protection for improved durability
7-pin connector
14" (35.56 cm) custom aluminum wheels with radial tires
Surge disc brakes on both axles
No Touch Vortex hub lubrication system with 6-year, 100,000-mile (1,609.34 km) limited warranty
Spare tire carrier with matching spare
All-welded rectangular GALVASHIELD frame
Space-saving swing-away tongue to reduce storage length
1,600-lb. (725.75 kg) swing-up locking jack with swivel wheel
Heavy-duty winch with nylon strap and bow safety strap
Integrated winch stand step with safety handle for easier boarding/reboarding at bow while boat is on trailer
Outboard motor support to reduce hull and transom stress while towing
Fiberglass fender design with integrated back-up lights
Carpeted bunks and fender boards to protect hull
Submersible LED lights
Safety cables
Similar Boats
More Bass Boats
The See Dealer Cost Story
When our family wanted to purchase our first boat we tried to find information for research. However the only information available at that time was sales brochures. All of the product information originated from the manufactures. The only price we could find was the retail price listings or MSRP (Manufacturer Suggested Retail Price). Magazines featured articles, and had really great photo layouts, it only offered product description and the (MSRP) retail price.
We went to the dealership where the sales guy held all the cards. The best thing he had going for him was our lack of information. We tried to wrangle on price without any real success. We bought the boat, but we paid too much. After that experience we felt there had to be a better way.
So we started this website because we did not want anyone else to feel disadvantaged like our family did that day. We discussed what we would like to see. We found experts in their fields and started asking questions. We then put together a team to research products and most importantly the dealer price. We started with boats and realized that there was a great need for information on many kinds of large purchase recreational vehicles and products.
Look when you visit a dealership for a boat, motorcycle or camper, if you have not done your research your negotiation for that item will start with the Manufactures Suggested Retail Price (MSRP). The highest price you could pay. The sales person will try to see what you know and size you up. If you do not have product knowledge including what the cost was to the dealer – you are going to pay too much.
See Dealer Cost™ offers product information that is in-depth and understandable. You can build your ideal product on line and see what it cost before you walk into a dealership. See Dealer Cost™ gives you the product options and most importantly the cost without the pressure of someone trying to talk you into something.
Knowledge is power.
After you find the product you want on See Dealer Cost™ and configure the options. You can save it to view or reference later. You can also print out what you put together (with the price). In turn you can use this information to negotiate your best deal.
What if the item is used? We are making available all the information we have gathered over the years so you can research to see the original cost. Even on used items you can use our site to negotiate your best deal.
Our passion here at See Dealer Cost™ is to give people power and knowledge. We were at a disadvantage once and we did not like the feeling.
By the way this great idea we had to build a website with this information. We had to fight to be able to bring this information to you. See Dealer Cost™ was supposed to be a one hit wonder. The manufactures magazines that they send to dealers said we would be dead in no time. They pounded their fists on their desks and said the consumer did not want or need this information. They said we would put them out of business. We were sued multiple times by manufacturers for this information. We are still here.
Why would they not want you to be able to see and use this information? They were afraid that you the consumer would be the true winner.
As it turns out – this information has not put anyone out of business. A consumer who is knowledgeable is confident buyer.
So we continue on with our team of experienced and expert people. We constantly update product lines and most importantly the cost so you have information to make your best deal.
We are proud of the team and proud to be able to assist you in your recreational purchase. We do not sell any of the items listed – we just gather the information.
The products include thousands of boats, motors, campers, motorcycles and more. We are constantly working to expand the information we present for you.
We all have families. We hope your buying experience is a better one than our family’s first purchase. Use this website to be a knowledgeable more confident buyer.
We hope we are a valuable resource for you. Enjoy your purchase.
Thanks,
See Dealer Cost™ Team Members
Welcome To See Dealer Cost!
Get Product and Pricing Information for Free!
Register
Why? It's Free!
- Save Research
- Save Product Configurations
- Compare Configurations
- View Saved Price Quote Requests
'
WAIT! You haven't printed your configuration yet.
We can email this valuable information directly to you, empowering you to negotiate the best price with a boat dealer.